The construction industry requires not only the use of specialized equipment but also to carry out outdoor job site activities. To make the job a little bit easy, construction heaters offer great help. It is especially true when you are doing any construction in arctic conditions. Cold weather presents a unique set of challenges to construction crew members participating in a project and only a construction heater will help you out. Here are some best ways to prevent moisture produced by construction heaters.
What is a Construction Heater?
Source: deeleyinsurance.com
Constructions heaters warm air for various heating and drying applications and effectively supply heat on all job sites. These heaters not only work for variously sized structures and buildings. Both also are great for the outdoors. Construction heaters offer precise temperature control and hence can be used at outdoor sites irrespective of what the climate of the area is.
If I talk about construction heaters more precisely, it has an inbuilt fan that forces heat for rapid warm-up of the area. The design also increases energy efficiency. You can use different fuels for them to work. For example, there are construction heater models that work on diesel, natural gas, or propane. You can choose the one depending upon the maximum job site convenience.
Why Do You Need Construction Heaters?
Construction heaters cure concrete, thaw frozen grounds that you need to work on. It also prevents frost from building up while saving fuel. Moreover, they prove very beneficial for concrete curing. Also, you can hire Sarasota concrete resurfacing contractor. They have the good ability to carry out these tasks without risks of fire or refueling. Hence, you can leave them unattended and all your job is done after turning them on.
Other Benefits of Using Construction Heaters:
- They are easy to set up,
- Simple to work with.
- You can easily move construction heaters to different construction sites. Hence, they are portable and very mobile.
- Construction heaters have long-lasting durability and dependability.
- Also, Construction heaters are guaranteed and CSA approved. You are ready to heat up any job site with the construction heaters.
Why Do You Need to Prevent Moisture at Construction Sites?
Source: hermannelson.com
While construction, you need to maintain optimal moisture content and maximum dry density. It is important both for road construction and for embankments. Excess moisture can damage brick and concrete during freeze-thaw cycles and hence must be avoided.
Excess moisture at construction sites also leads to the corrosion of metal building materials. For example, wires, conditioning coils, structural fasteners, and metal roofing all need to be protected.
Other reasons to prevent moisture at construction sites include:
- It may ruin your paints and varnishes for the construction site
- Degrades thermal insulation and breakdown water-soluble building materials. For example, gypsum boards.
- Moisture causes the rotting and warping of wood materials at the construction site.
There are many different ways through which you can prevent excess moisture away from your construction sites while using a construction heater. Continue reading to know the ways to prevent moisture produced by construction heaters.
Prevent Moisture Produced from Construction Heaters Using Following Methods
Source: hermannelson.com
There are various things you can do to keep moisture away from forming on your construction site while using industrial wall heaters. These include the heater’s location, drawing only fresh air in, and sufficient ventilation. We’ll walk you through our ideas for keeping your work site dry.
1. Let Fresh Air Enter
When putting your construction heater in place, keep in mind that moisture on your construction site is a concern. When employing direct-fired or direct-fired enclosed flame heaters, it is critical to have plenty of fresh air.
We’ll start with a technical explanation of how these heaters function. Direct-fired and direct-fired enclosed flame heaters generate heat by drawing air directly over a flame created by the combustion of propane or natural gas. As a result of coming into close touch with the flame, this heat produces little amounts of moisture. It’s for this reason that they’re known as direct-fired heaters.
If you want to keep moisture out of your enclosed building site, make sure these heaters are drawing in 100% fresh air. The air drawn in from the outside will be dryer than the air inside the structure. The heater will produce as little moisture as possible by burning this dryer air.
2. Proper Ventilation
When it comes to preventing moisture on your construction site, appropriate ventilation is essential. Let’s take a look at some science for a moment. Warmer air rises and pushes cooler air down, as we all know. When it comes to ventilation, you’ll want to make sure there’s a way for warm air to escape. Your moisture will be carried away by this warm air.
To help blow away moisture, construct ventilation at the top of your structure so that the warm air and moisture can escape.
3. Placement of Your Heater
The location of your heater is the last thing to consider when it comes to preventing moisture. We suggest making vents in the route of your heater for venting. You’ll also want to install your heaters in an area where the heat can flow throughout the structure to efficiently reduce total moisture on your construction site.
Heaters should be placed near stairwells or open areas. The hot air from your construction heaters can readily circulate throughout your facility if they are placed near stairwells. This means you’ll be able to heat your room more efficiently while also allowing moisture to escape more easily. This positioning can save you money on fuel while allowing as much moisture to escape as feasible.
4. Change Your Heater
Some heaters don’t create any moisture at all if you’re operating in an environment where you can’t have any excess moisture. Indirect-fired heaters and electric heaters are examples of these heaters.
Electric heaters do not produce moisture because they do not utilize a fuel source to generate heat. These heaters are ideal for heating homes, offices, and medical facilities because they do not emit any toxins that must be vented.
Conclusion
Follow the above steps to help prevent moisture from accumulating on your construction site. Be careful to only heat fresh air, provide adequate ventilation, and position your heater in a way that promotes airflow. Renting indirect-fired or electric heaters is another option.
The townhouse’s first impression is normally too small, too compact, too narrower, and the list is endless. Well, let us…
Casa Del Fascio Casa del Fascio is considered the masterpiece of Rationalism in Italy. The whole construction was started in…
The research will range from the study of one single molecule to the entire brain, from psychology to computational neuroscience,…
Being the head coach of an NFL team has its perks. This includes being able to live in a multi-million-dollar…
We all have a dream of living in a luxurious home that would fulfill all our comforts, right! But have…
The Iconic Mosque Recently, architects of Design Plus Architects & rat[LAB] Studio: Abhishek Bij and Sushant Verma have come together…
Chapel of The Holy Cross Situated in Sedona, Arizona, The Chapel of the Holy Cross is actually a Roman Catholic…
Do you have an interest in architecture and like to explore various building structures? If yes, then you might have…
Cadillac House Designed by Gensler architectural firm, Cadillac House is a contemporary museum and cultural center that is specially constructed…
The Wintrust Arena is a multi-purpose event space famous for hosting wonderful basketball matches. Not only basketball matches but it…
Planning to renovate your bathroom space? If yes, there are so many things to think about! Gone were the days when…
Do you know experts recommend cleaning your washing machine every month to avoid build-up? Table of Contents How to Clean…