There are many tools that drywall contractors use all the time for their work. You might have seen most of them, but there might be some you were not aware of. Some of these might be brand new to you.
There are many contractors around that you could talk to about these tools. You could also ask a Drywall Tampa Pro to see what tools they use. They will be able to tell you all about them.
This article will help you to learn about some of these tools. It will help you to see what tools you might need if you are planning on doing some sheetrock work. You can also do more research to see what other tools you might need.
Top 20 Drywall Tools
1. Sheetrock Knife
These are also called putty knives and spatulas. They are used to apply the compound over the sheetrock to put two pieces together. You will also use sheetrock tape to put the pieces together and add the compound over the top.
2. Drywall Lifts
These lifts are used to put the drywall up on the ceiling – and are especially helpful if you only have one person doing the job. You might not need to use one if you have multiple people helping you. These are mostly used for safety and do come in handy.
3. Jab Saw
A jab saw is a tool that allows you to cut holes in the wallboard: https://homerepairgeek.com/tools/keyhole-saw.html. The standard holes are usually between six and eight inches in length. These tools can also have uses, as well, but this is what they are designed for working with wallboard.
4. Electric Sheetrock Saw
This is similar to a large jab saw but is not used to cut holes in the sheetrock. Instead, it is used to cut large pieces of sheetrock into smaller pieces. It can save time from using other tools that are designed for this job.
5. Utility Knife
A utility knife is a small knife that can also be called a boxcutter or razor knife. It is used to score the wallboard to break it into smaller pieces. This also has many uses that are not related to wallboard.
6. T-Square
Carpenters often use smaller T-squares to do their jobs. As the name suggests, it is in the shape of a T and is used to draw lines to help you to cut the wallboard where it needs to be cut. The ones that are used for the wallboard are about four feet in length.
7. Tape Measure
This is a tool that most people are familiar with. It is a metal spool that has measurements marked off in fragments of inches or centimeters. It is used to measure the size of the sheetrock and where to make cuts.
8. Dust Mask
A dust mask is a mask that you should wear when dealing with drywall. The drywall kicks up a lot of dust and you don’t want to inhale it. Wearing a dust mask helps to prevent this from happening.
9. Drywall Corner Knife
These are putty knives that are bent at a 90-degree angle. This helps you to get the compound into the corners neatly. They work just like a regular putty knife; they just allow you to get into those corners.
10. Sheetrock Mud Pan
This is a pan that you place your compound in so that you don’t have to carry the whole bucket with you. It also gives you a place to wipe off the extra compound that you might have on your putty knife. They are often large enough to hold what you need, but small enough for you to be able to carry it with you.
11. Carpenter’s Pencil
This is just a simple pencil that is usually rectangular in shape rather than round. It is used to mark your measurements when you are putting up the drywall and cutting it. You could use a regular pencil, but these will stay in place and not roll around.
12. Mixers
Sometimes, you will need to have a mixer to mix up the compound. You can get a dry compound and mix it with water for some jobs. You will need the mixer in cases like these.
13. Pan Grips
These are grips that you put on your compound pans. They are used to help you carry the pan and to keep you from tripping over it as it is on the floor while you work. See here to learn more about this tool. These are not absolutely necessary, but they can help you a lot.
14. Texture Sprayers
You might not always want a flat surface for your wallboard. If that is the case, you can use a texture sprayer to add texture to your walls. You also see texture being used on ceilings a lot.
15. Drywall Screws
Screws are a better way to secure the wallboard to the wall than nails. Nails often pop out and cause problems later. You usually want to use screws that are 5/8 inches long.
16. Drywall Screw Gun
This could be a specialized tool that you use just for the wallboard. It could also be a drill that is fitted with screwdriver bits so that you can use it. Either way, it helps you to complete your job quicker than if you were going to do it by hand.
17. Sanding Sponges
A sanding sponge is similar to sandpaper but is attached to a sponge. They usually have a smoother side and a more abrasive side. These are easier to use and easier to hold than a single piece of sandpaper.
18. Sanding Pole
This is used to attach to a sanding sponge so that you can reach spaces that are higher up. This is just a regular pole that can be used to do this. It can also be used to reach those difficult places that your arms just can’t reach.
19. Corner Sander
This is similar to the corner putty knife and is used to get into those corners. It is also shaped into a 90-degree angle so that it fits into those corners. It makes sanding those corners much easier.
20. Contractor Software
If you are a contractor with multiple jobs going on, you might need contractor software to help you to keep track of your jobs. This can help you to record every job that you have and the progress that you have made with each one. This is not a necessary tool if you are doing it in your own home.
Conclusion
There are many tools that are necessary for you to have if you are going to put drywall up in your home. Some of these you might have already, but some are more specialized. You can manage without some of them but having them all would help you to do a better job and do it quicker.
Discover More
